skip to main text

Using Caller ID Service to Reject Calls

If you subscribe to the Caller ID service, the printer detects the sender's Caller ID. If the sender's ID matches the condition specified in this setting, the printer rejects the phone call or fax reception from the sender.

Note

  • This setting may not be supported depending on the country or region.

    Contact your telephone company to confirm whether it provides this service.

Specify the setting following the procedure below.

  1. Check that printer is turned on.

  2. Select Settings on the HOME screen.

  3. Select Device settings.

  4. Select Fax settings.

  5. Select Security control.

  6. Select Caller rejection.

  7. Select Subscribed.

  8. Select whether to reject a phone call or fax reception from an anonymous number.

  9. Select whether to reject a phone call or fax reception out of the subscribed service area.

  10. Select whether to reject a phone call or fax reception from the specified numbers.

    If you select Reject, you can register the fax/telephone number to reject.

    When the message is displayed on the LCD, select Yes, then register the fax/telephone number to reject.

    For details on how to register the rejected number, see Registering the Rejected Number.

    Note

    • Even if you select Reject, the printer rings once.

      (The printer may not ring depending on the country or region.)